Serving the Modesto area  ·  (209) 287-3185  ·  Open Mon-Sun 7am-7pm
📞 (209) 287-3185 Free Quote

Metal Roofing in Modesto, CA (95351) · Local Professionals

Modesto Metal Roofing · Fast response in Modesto and the Modesto area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+271Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Modesto's flat valley floor bakes under 100-degree summers, and that relentless sun punishes every roof from the Craftsman bungalows in La Loma to the two-story stucco subdivisions off Village One. Metal roofing holds up where asphalt shingles curl and crack, and we've installed it on everything from 1920s Spanish Colonial homes near Graceada Park to modern farm shops out by the orchards.

Homeowners in 95351 call Modesto Metal Roofing because we understand local roof killers: UV degradation, thermal expansion that backs out fasteners, and spring wind off the almond orchards that lifts panels. We're fully insured and we show up when we say we will.

Metal Roofing in Modesto (95351)

Modesto sits on the Tuolumne River floodplain, and the ground here moves with our clay-heavy soils through wet winters and bone-dry summers. That movement stresses flashing and penetrations, especially on older homes in Old East Modesto and the Airport district where low-pitched shingle roofs have been patched for decades. We see a lot of failed fasteners on 1970s ranch roofs in Dryden Park and Sylvan, and separated seams on standing seam panels after a wind event. Our crews know how to detail valley flashings for the flat, low-slope sections common on Mediterranean Revival homes, and we match stone-coated steel profiles to the clay tile look that fits La Loma's historic character. For rural properties along the orchard edges, corrugated and R-panel metal on barns and packing sheds is a different animal, and we handle that too.

We've been serving Modesto and the surrounding Stanislaus County area long enough to know which neighborhoods have HOA design review (the north side subdivisions) and which historic districts require extra care with panel profiles and colors. We pull permits through the city and coordinate inspections so you don't have to chase paperwork.

Our services in Modesto

How a Job Works in Modesto

Step 1: Call us at (209) 287-3185 or request a free estimate online. We'll schedule an on-site assessment, usually within a couple of days. We climb the roof, check the decking, flashing, and fasteners, and talk through options that fit your home's age and style, whether that's a full standing seam install or a retrofit over existing shingles.

Step 2: Once you approve the scope and price, we pull the required permits through the City of Modesto and schedule the work. On tight lots in older neighborhoods like La Loma or College Area, we plan material staging carefully so we don't block driveways or alley access. If your HOA requires design approval, we provide the panel profile and color samples they need.

Step 3: After installation, we walk the property with you, magnet-sweep for nails, and haul away all debris. We leave your yard and gutters clean, and we don't consider the job done until you've signed off on the final walkthrough.

Pricing in Modesto depends on roof size, pitch, access, and the condition of the existing decking. As a ballpark: corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof installation starts at $8 per square foot, standing seam runs from $10 per square foot, and metal roof replacement starts at $9 per square foot. A retrofit over existing shingles starts at $7 per square foot. Repairs and leak fixes start at $450, screw replacement and re-fastening at $750, and flashing or chimney repair at $600. Coating and painting start at $2.50 per square foot. We give free estimates and explain exactly what drives the number, so call (209) 287-3185 to schedule yours.

My 1950s ranch in Dryden Park has a low-pitch shingle roof that keeps leaking at the fasteners. Can metal roofing fix that?
Yes. Low-slope roofs are common in Dryden Park and Sylvan, and they're hard on asphalt shingles. We often recommend a standing seam or corrugated metal panel with proper underlayment and closure strips designed for low pitch. We'll inspect your decking first, because if it's soft or delaminated, we replace it before installing metal. That solves the recurring leak problem at the source.
A windstorm just peeled back panels on my barn off Crows Landing Road. How fast can you respond?
We handle storm and wind damage repairs and offer free inspections for storm damage. Call us at (209) 287-3185, and we'll schedule an assessment as quickly as possible, usually within a day or two depending on volume. We can tarp or secure the area to prevent further water intrusion, then provide a repair estimate. We document everything for insurance purposes, though coverage decisions are up to your carrier.
What does a typical metal roof replacement cost for a 1,800-square-foot home in Modesto?
For a home that size, a metal roof replacement typically starts around $9 per square foot, so you're looking at roughly $16,000 and up depending on panel type, pitch, and whether we need to replace decking. Standing seam costs more, starting at $10 per square foot. A retrofit over existing shingles can save money, starting at $7 per square foot, but code limits how many layers you can cover. We give free estimates at (209) 287-3185.
Do I need a permit to replace my roof in Modesto, and how long does it take?
Roofing permits are commonly required for a full replacement or re-roof, and requirements vary by jurisdiction. We recommend checking with the City of Modesto's building department for current thresholds and fees. We handle the permit application and inspections for you as part of the job, and we build the timeline into your schedule so there are no surprises.
My HOA in Village One has design rules. Can you help with approval for a metal roof?
Yes. Many north-side subdivisions and HOAs have design review for roof profile and color. We provide product samples, color chips, and manufacturer specs you can submit to your HOA. If there's a property-line question about where your roof drains or how panels overhang, we can review your plat map and coordinate with your neighbor. We've worked in Village One and Vintage Faire and know what boards typically ask for.
Are you insured for roofing work at my Modesto property?
Yes, we are fully insured with general liability and workers' compensation coverage. That protects you if anything goes wrong on your property and covers our crew while they're on your roof.
What maintenance does a metal roof need in Modesto's heat and dust?
Our summers are hard on everything, but metal roofs are low maintenance. We recommend an annual inspection to check fasteners, sealant at penetrations, and debris buildup in valleys and gutters, especially if you have valley oaks or olive trees dropping leaves. Coating or painting every 10 to 15 years helps reflect UV and extend the panel life. After a big wind event, a quick look at panel edges and ridge caps is smart. We offer free estimates for inspections at (209) 287-3185.
Why choose us?

Trusted professionals in Modesto

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Modesto

All your work handled by qualified professionals in Modesto

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

271+ Verified Client Reviews in Modesto

⭐⭐⭐⭐⭐ 4.9/5 · 271 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Modesto · Response within 24h · No commitment · ☎ (209) 287-3185

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Modesto ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm